7700 Series
- The 7700 Back Pressure Regulator (BPR) Series is an excellent and economical device for relief and control of pressure in liquid and gas service. Valve control is accomplished by upstream pressure acting on a lapped piston, which is acted on by a spring. The valve will open at a determined set pressure, which is field adjustable.
MDA/MDAS Choke Valves
The MDA / MDAS Series Chokes are made with wear-resistant material to extend service life, with redundant O-Rings on the Bonnet Seals and Stem Seals that help prevent leakage. Fully Guided Stems reduce imbalance and vibration. Control Discs provide ANSI Class III/IV Shut off.
CA/CI Choke Valve
CA CI Choke Valve: The C series is a variable orifice valve economically designed to provide accurate and dependable flow control and an increased valve life under all types of conditions and applications.
1600 Series – Gauge Plugs & Probes
The Taylor Gauge Plug and Probe System™ has been a standard in the oil field since 1959. Taylor Gauge Plugs are found on wellheads, flow lines, and pressure vessels – where accurate pressures are required. They are also used in water purification systems, steel mills, and chemical and manufacturing plants throughout the world.
The small area of the stainless needle means that only a 6 lb. push per 1,000 psi in the system is required to force the probe into the Gauge Plug® and open the valve. Lock-On-Probes are recommended where the pressure or sample device is to be mounted onto the Gauge Plug® or where the pressure on the Gauge Plug® exceeds 5,000 psi.
The small area of the stainless needle means that only a 6 lb. push per 1,000 psi in the system is required to force the probe into the Gauge Plug® and open the valve. Lock-On-Probes are recommended where the pressure or sample device is to be mounted onto the Gauge Plug® or where the pressure on the Gauge Plug® exceeds 5,000 psi.
8250 Series
The Taylor 8250 Safety Relief Valve is manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 for Air/Gas and Liquid service making it an excellent choice for Air, Gas or Liquid relief applications.